OneTouch Select Plus Control solution

Use the control solution to verify that your meter and test strips are working properly.

Before using your ^OneTouch® meter to perform a control solution test, carefully read the owner's manual and the package inserts that came with the components of your system.

^OneTouch® control solutions are used to check that the meter and test strips are working together properly and that the test is running correctly.

We recommend a control solution test:

• Every time you open a new tube of test strips.


• If you suspect that the meter or test strips are not working properly.


• If you have had repeated unexpected blood glucose results.


• If you drop or damage the meter.

To perform a control solution test with your OneTouch ^Select® Plus or OneTouch Select Plus ^Flex® meter, you will need OneTouch ^Select® Plus control solution.

After the ^OneTouch® control solution is applied to the test strip, the meter will count down until the test is complete.

The ^OneTouch® control solution test result should fall within the range printed on the test strip vial. If your control solution result falls outside the expected range, repeat the test with a new test strip.

Caution: If you continue to get control solution results that fall outside the range printed on the test strip vial, do not use the meter, test strips, or control solution. Contact customer service .

For more information: www.OneTouch.be

Our OneTouch® customer service is there for all your questions and personal support.

• Free telephone support when starting up and using your blood glucose meter


• Free product warranty


• Free online tips about diabetes